5 Professional Brake Maintenance Tips for Top Performance

The easiest way to get into a dangerous situation on the street is by driving a car without properly functioning brakes. Bringing a car weighing over 2 tons from 60mph to a standstill within a few metres requires a considerable amount of energy, something that the brakes generate by means of friction.

It is, therefore, paramount that the brakes of your car stay at their peak condition throughout your car’s life. However, brake pads and other components of the system are prone to damage and wear owing to the continuous heat and pressure they have to withstand.

Every time you press on the brake pedal, they come in contact with the flywheel, generating friction that wears both the parts. It is unavoidable, and hence, you need to take specific preventive measures for ensuring that they are kept in proper working condition.

  1. Look out for signs of brake failure

There are some clear indications that can reveal a potential problem with the brakes. As a driver, you should keep your eyes and ears open to these indications.

  • Screeching sound when you apply the brakes

  • Soft or spongy brake pedal

  • Burning smell when you use the brakes

  • Brake fluid leak

  • ABS warning lights

If and when you encounter any of these signs, take your car to a reputable car garage like Preston Tyre Bay for brake repair in Preston.

  1. Inculcate safe driving habits

The biggest enemy of your car’s brakes is you abruptly using the brakes hard. Braking harshly every single time can take a few years out of your brake’s longevity. If you drive consistently, it is not only healthier for the brakes but the overall condition of your car. Here are a few tips you may follow for a longer brake life.

  • Avoid accelerating and decelerating abruptly.

  • Try to bring the speed of your car down by coasting before applying brakes.

  • Use engine braking wherever applicable.

  • When you see a traffic signal coming up, slow down from a distance.

  1. Go for periodic inspection

Experts recommend that you should check the condition of your braking components at least once a year. It is advisable to do so when you come in for your annual car servicing. Let the mechanics at the garage take a look at your braking system and inspect it for any defects.

  1. Keep an eye on the oil

The brake fluid plays a crucial role in lubricating and cooling down the essential components of the system. The condition of this fluid deteriorates over time; it becomes ineffective and fails to keep the system cool and adequately lubricated. You should check the level and condition of this fluid at least once every month and refill as and when necessary.

  1. Invest in good tyres

It may seem unrelated, but the braking performance of your car is largely dependent on tyres. If you install premium quality tyres on your car, it is a lot easier for the brakes to bring the vehicle to a stop. If your tyres are worn out, your brakes will obviously have a difficult time decelerating your vehicle.

Note: Invest in car tyres in Preston that have an above average EU tyre rating.

The amount of time and money you spend on brakes is an investment in your safety. Follow these tips to avoid expensive replacements or repairs.

Leave a Reply

Your email address will not be published. Required fields are marked *