A Guide to Identify and Troubleshoot Your Car’s Suspension Problems

Your car’s suspension system does two jobs. One, it provides a smooth ride over the bumps. Two, it gives you greater control and safety with proper steering response. The components making up the suspension system wear out over time due to friction and lower the vehicle’s ability to adapt to difficult road conditions.

Your vehicle’s suspension is put to test in rough tarmac or at high speeds. It is better to inspect how efficiently your vehicle’s suspension system is performing rather than wait for them to fail and put your safety at risk.

Get a better idea on how your car suspension works and how to get the best performance out of it.

Struts and Shocks

These are the primary components that keep a vehicle in control while trudging on an uneven surface. A dysfunctional shock or strut means you run the risk of losing control while driving. Look out for these signs to identify an issue with them –

  • An increased braking distance.

  • Facing a front-end dive while applying the brake.

  • An unstable steering.

  • Any fluid leak from the shocks.

If you see any of the above signs, it’s time to go for a Suspension Repair in Pickering. Also, know that the struts and shocks will require replacements after about every 30,000 miles depending on the driving conditions.

Wheel Bearings

These are fixed inside the wheel’s hub unit and help the wheels rotate on the axle smoothly. The first sign of worn out bearings is a squealing, chirping or grinding noise while speeding, taking a turn or applying brakes. These bearings generally wear out after 85,000 to 100,000 miles, and they need replacement.

Also, you need to go for a check and give them proper lubrication after every 25,000 miles.

Impact of Wheel Bearings on Tyres

Since tyres are the only point of contact between the road and the vehicle, it becomes even more necessary to keep the wheel bearings in proper running conditions at all times. Bearings are vital to ensure that tyres do not go through frequent uneven wear and tear, or do not face permanent damage due to inefficient rolling on rough roads. As an impact, it may lead to a loss of control on the vehicle and cause accidents.

Rod-ends and Ball Joints

Rod-ends connect the steering linkage with the wheels, and ball joints enable the suspension to move up and down while turning the wheel. Worn-out joints will lead to negative steering response.

Look for a clunking sound when rolling over bumps or a popping sound when moving the steering. Take them for repair or replacement when you get these hints. Also, keep these joints well lubricated for a comfortable drive.

Bushings and Stabiliser Bars

These bars stabilise a vehicle during sharp turns and are attached to the chassis with a rubber bushing. A loose steering response means that the bars and bushings are not working properly. It is also advisable to replace the bushings after every 50,000 miles.

You can go to Add Tyres and Exhausts for any of the above-given repairs and replacements. You can also contact them for routine servicing of your vehicle or even for a new set of Tyres in Pickering.

Identifying a suspension issue with your vehicle on time is necessary to avoid any unexpected mishap. Take care of your car and enjoy safe rides.

Leave a Reply

Your email address will not be published. Required fields are marked *