A quick look inside your car’s engine components will give you an idea of all the metallic parts function together while the engine is running. Naturally, a high amount of friction is generated when the pistons repeatedly executes reciprocatory motions, multiple times, within a matter of few seconds.
Reducing the amount of friction is essential for efficiency and to avoid heat generation of dangerous magnitude. Hence, lubrication with the help of a viscous medium is essential.
Lubrication between all these different components is achieved with the help of engine oil.
What is The Purpose of Engine Oil?
Engine oil or motor oil, is a mixture of petroleum-based oil and various other additives. Additives present in engine oil may include anti-wear agents, dispersants and viscosity improvers, and detergents. An anti-wear additive’s function is to prevent metal to metal contact and reduce abrasion.
Functions Of Engine Oil
It dissipates the heat that forms as a result of continuous friction between moving metallic parts.
It reduces friction between all the engine components in motion.
Keeps your engine clean, by preventing deposition of sludge and varnish.
Engine oil neutralises the acids that originate from oxidation of fuel.
It also improves the sealing of piston rings.
As you can understand, to perform these functions, the oil needs to come in contact with a lot of contaminants. Hence, over time, dust, dirt and debris from the engine degrades the quality and functionality of this engine oil. So, the need for routine oil change is an obvious necessity. A convenient approach is to go to a professional garage for an Oil Change Ripley.
How often you’ll have to change your engine oil will vary with the type of car you drive and how often you use it. A standard recommendation is to change your oil every 5,000 miles.
Steps To Change The Engine Oil On Your Own
You will need to consider the right type of oil for your car. Before buying engine oil consider factors such as viscosity, the temperature of your location and type of car you own.
To drain out your old engine oil, run your engine for around 5 minutes to get the whole system warmed up. Doing this will thin out the oil and help to drain it quickly.
Use a hydraulic jack to raise your car. Now locate the sump plug and place a pan below it and then unscrew the plug.
Remove oil filter and replace it with a new one.
Refer to your manual to get an idea about the amount of oil you need to fill in your engine. Then identify your oil cap, which will be generally located on top of the engine. Pour the oil using a funnel.
Not changing your oil on time can lead to faults with other components of your car. Oil should be a part of a full car repair in Ripley, but you should never wait until your car breaks down, to opt for an oil change. In case you need to seek expert advice as well as top-end products, visit professional auto garages such as MG Autos. They also provide other essential services such as car repair and clutch repair.