Sufficient oil pressure helps in keeping the moving parts of your engine lubricated and prevents the build-up of excess heat. That pressure depends on numerous factors like oil supply, the condition of your car’s engine and oil pump, weather, etc.
Car owners can measure oil pressure without putting much effort. Most of the older car models come with a pressure gauge. However, newer models come with a warning light for low oil pressure on their dashboard.
How to Measure the Engine Oil Pressure?
You can take your car to an auto shop for Engine Diagnostics Newport, UK, and ask their mechanic to check its oil pressure.
Or, you can measure it yourself with a gauge. The gauge visually represents the oil pressure; it usually tops out at 50 to 60 psi. Take care that the pressure never dips into that red zone of the gauge.
If your car is equipped with a warning light, it’ll indicate whenever the pressure in your car’s oil pump is critically low.
Whenever the pressure dips below that red mark,or the warning light comes on, shut down your engine immediately.Low oil pressure can lead to overheating of the engine and its eventual blowout.
Causes and Solutions for Low Oil Pressure
Insufficient Oil in the Oil Pump
Inadequate level of oil is one of the most common reasons for low oil pressure. Since owners often forget to check and refill their engine oil, the pressure takes a beating.
Therefore, the appropriate solution would be checking the oil level periodically and refilling it whenever it deems necessary. Also, regular Vehicle Servicing in Newport from auto garages like Trade Price Tyres to repair any failing engine components will also ensure appropriate oil pressure. These garages are equipped with all the necessary equipment to determine and fix any issues with your engine oil pressure and its other components.
Wear and Tear of Bearings
Bearings play a significant role in maintaining a right balance of your four-wheeler’s oil pressure. Thus, your car may experience lower oil pressure as a result of the damaged rods and loose bearings, obvious wear and tear issues.
A solution for this is replacing the bearings along with restoring other worn out engine parts. Also, installing an oil pump of higher volume can enhance the oil flow and hence, its pressure.
Oil Filter Containing Dirt and Grime
When the oil is propelled through the pump, it passes through a filter. If debris and other particles clog the filter, the oil does not get a smooth passage and as a result, you may notice a lower oil pressure.
Replacing that clogged filter is its only fix. Take the advice of professionals in such situations before taking any action.
Maintaining sufficient oil pressure is essential for your car’s smooth functioning. The engine won’t be able to perform at its best if it doesn’t get the adequate supply of oil. Take these steps to diagnose low oil pressure and bring it up to the recommended level.