How To Choose The Correct Brake Linings/Brake Pads

Brakes play an essential role in maintaining the road safety of you and your car. This is the first line of defence in any critical condition. Therefore, a component this important should be kept in tip-top shape to avoid any failures.

As much as the brake fluids are responsible for good braking, the same is with the kind of lining you use. The brake lining provides the necessary friction that is needed to stop a rotating wheel.

There are Various Kinds of Friction Linings Available in the Market; Some of Them Are:

Organic Friction Lining or Brake Pads:

These linings are made from an organic compound known as asbestos. This material is an excellent heat absorbent. Even though this material has brilliant heat characteristics, it is a carcinogen material, meaning that it can cause cancer with extended exposure. Manufacturers found that asbestos leaves a trace mark on the tyres after it wears out that is unsafe for humans, and hence, it was termed life-threatening to use.

Organic brake pads are now manufactured with the help of more safer compounds like rubber, carbon, glass or fibreglass, Kevlar, etc. and are held together with the support of a natural or synthetic resin. These brake pads are relatively cheaper and produce minor chipping in the form of dust as compared to metallic pads. This kind of pads produce lesser heat as the friction provided by them is a moderate one. The organic pads don’t put much strain on the rotors and hence prevent the driver from an unexpected expense.

They have numerous disadvantages as well, such as:

  • They wear faster than their other counterparts.

  • Their functionality is temperature dependent.

  • Driver, due to the high compressibility of organic pads, has to apply more pressure to get adequate results.

Ceramic Friction Lining or Brake Pads:

Ceramic brake pads are made from the ceramics or clay from which the basic household pottery is made. The composition is higher density than the usual pottery ceramics. Copper fibres are introduced in these pads to increase friction and better heat transfer capabilities.

Ceramic brake pads are responsible for massive noise reduction as its use will produce faintest of noise on applying the brakes. When compared to organic linings, these types of friction linings are substantially resistant to wear and tear. They also provide a great range of temperature efficiency for the proper functioning of the pads.

The issues that are associated with the ceramic pads are its price and heat generation. The pads also fail to work when racing in cold conditions.

Metallic Friction Lining or Brake Pads:

Metallic brake pads are made from 35 to 70 per cent of metals like copper, steel, or some other alloy material. The metals are then held together by the graphite. The different metals have different advantages, and hence, their use greatly enhances the working of the pads.

For performance-based cars, metallic brake pads provide greater control. As metals are a good conductor of heat, they can survive a considerable amount of heat compared to the other two brake pads and will dissipate heat in much lesser time.

The negatives of using these are more noise, more strain on the rotors, and more chipping of metal.

If you want more information on which lining will fit you the best, call us. Here at Triple S MOT Centre, we carry out Brake Pad Replacement Slough with the best materials available in the market. So the next time you are looking for brake pad replacement, don’t forget to visit us.

Leave a Reply

Your email address will not be published. Required fields are marked *