How To Make Sure Your Car Tyres Are Safe for the Road?

When it comes to tyres, most drivers face difficulty to wrap their heads around what’s what.”

From figuring out the label markings to inspecting tread depth and tyre pressure – all of these aspects seem confusing if you aren’t sure what to look for.

However, your vehicle’s tyres hold significant importance in determining the safety of your car. What’s worse, if you drive with failing tyres, you not only risk your safety but could be breaking the UK laws as well.

Therefore, let’s brush your knowledge on tyres in Retford with this information and tips.

  • Tyre tread depth

Sufficient tread depth is essential so that your vehicle can firmly grip the road. Low tread depth could be fatal under wet conditions as your car might land in an accident.

In the UK, keeping a minimum of 1.6mm of tread depth is compulsory. Driving below the legal limit could be penalised with up to 2500 British Pounds and 3 penalty points for each tyre. So, if you notice your tyres are going “bald”, buy a new set of tyres in Ordsall.

How to check tread depth?

Use a tread depth gauge which gives an accurate measurement and helps you to determine if it’s under the legal limit or not. However, this tool is usually used by workshops that provide a diagnosis of vehicle tyres in Retford.

Alternatively, you could also do this test at home with a 20-pence coin. Slip the 20p into the tyre’s groove and notice if you can see the outer strip of the coin or not. If it’s not visible, the tread depth is above the legal minimum. But, if the outer band is visible, you might have to replace your car tyres in Ordsall.

  • Measure tyre pressure

Proper tyre inflation plays a pivotal role in road safety. Without correct pressure, you’d eventually lose control over your vehicle. Underinflated tyres adversely impact the grip and handling of your car. On the other hand, over inflation makes tyre susceptible to punctures or even blowouts.

Therefore, check the pressure of car tyres in Retford routinely from a local garage.

How to measure tyre pressure?

First, know the ideal PSI (pounds per square inch) for your vehicle from the owner’s manual. Now use a digital pressure gauge to check the inflation or deflation rate. Make sure you measure the pressure when the tyres are cold for maximum accuracy.

  • Signs of wear and tear

There’s no denying the fact that regardless of how well you drive, tyres wear out over time. But, unless you pay heed to it, you might not be aware of the signs of damage. Conditions like uneven tread wear or lacerations on tyre surface pose a threat to your safety.

It means if you aren’t scrutinising the tyres regularly, you could probably be driving on unsafe tyres! Hence, take some time out to see if your tyres show signs of – cuts, bulges and cracking on the sidewall.

If you notice any unusual signs, take it to Harworth Tyres Services. They offer several flawless repairing services of car tyres in Retford.

Leave a Reply

Your email address will not be published. Required fields are marked *