MAINTAINING YOUR VAN TYRES

Van tyres are the specially designed tyres which come with additional strength and durability in contrast to the standard car tyres. Braced with a stronger sidewall, van tyres are meant to carry heavy loads over long distances. To advise the driver about the weight capabilities and constraints of the tyres, they come with a marking on their sidewalls such as XL(extra large) and RF(reinforced).

Responsible for transporting heavy weights over long distances, van tyres have a tough on-road experience and regularly encounter difficult tarmacs and diverse driving conditions. All of this points towards the importance of choosing the correct van tyres and following a proper routine of maintenance and service. Choosing the right van tyre and maintaining it properly reduces fuel consumption which lets you save a few bucks, and even helps reduce the levels of CO2 emissions that get released into the atmosphere.

It is essential that the tyres are looked after properly so that they perform at their maximum efficiency. Ignoring the maintenance of your tyres may put your tyres at risk and could cost you more money. Tyre being an essential part of the car, it is important to carry out regular tests to ensure the safety and security of the tyres. Ignorance in maintaining the tyres or the effect of any glitch in tyres can be significant in terms of cost of repairs.

The drivers or the technicians can check the tyres against the following factors:

1. TREAD DEPTH

When we speak of the safety of tyres, tread depth is one of the important factors that we have to check for. The depth of tread in vans is more critical than that of the usual cars because, in comparison to the regular cars, the prior are heavier and carry heavy weights, which implies increased stopping distance. According to the present UK law, the minimum acceptable depth of tyres is 1.6mm across the central three-quarters of the tread and around its complete circumference. The drivers who are found to breach this law are imposed with a fine of £2500 and three penalty point for each tyre. Though the minimum acceptable depth is 1.6mm, for security and safety purpose, it is wise to change the tyres for icy and wet conditions, before it reaches its minimum tread depth.

2. PROPER TYRE CONDITION

The tyre needs to be in excellent condition to ensure its proper functionality. To ensure the good condition of tyres, a few things need to be taken care of. Cleanse any soot that is present in the valves and ensure proper fitting of valve caps to each wheel. Separate any pebble, stone, twig, or any other particle that may be stuck in between the tread block. Keep an eye for any cuts, bulges, etc. in the tread or the sidewall of the tyres. If you see any sign of non-uniform wear in the front tyres, check for proper alignment of the steering.

3. RIGHT TYRE PRESSURE

For any category of the tyre, carrying light or heavy load, balanced air pressure in the tyre is the most important factor. Not having the correct tyre pressure exposes your car to danger and risks. Be it an under-inflated tyre or an over-inflated one, both contain similar kind of hazards. In case of van tyres, due to its purpose of carrying heavy loads across long distances, it is vital to check for the specified tyre pressure level as any ignorance to that may put the driver and the others around at risk.

Van Tyres Newport merchandises a large range of van tyres at the most affordable rates and offers a team of dedicated service technicians for servicing your car.

Leave a Reply

Your email address will not be published. Required fields are marked *