Wheel Alignment vs. Balancing – What is the Difference and How to Diagnose the Issue

Wheel alignment and wheel balancing have always been 2 of the most perplexing issues in automotive history. Both show somewhat similar indications. Yet, the reason why they happen and how to mend the problem is entirely different than each other. It is easy to get confused about what exactly happened with your vehicle unless you know the difference between wheel misalignment and imbalance.

Wheel Alignment Vs. Wheel Balancing

Wheel alignment is an issue with a car’s suspension and axle. Ideally, all four wheels should stay at a manufacturer specific angle, pointing forwards. If there is a misalignment, forward or backward wheels point inwards or outwards or camber out from its original position. All these will cause the tyres to drag against the road.

On the other hand, wheel balancing deals with localised heavy spots in a car’s tyres. If your car’s tyres accumulate excessive material at any one place on its carcass, it will throw its overall balance. This can cause the tyre to bump against the road with each revolution, causing excessive vibration and several other issues while you are driving.

Identifying The Issue

Both wheel alignment and wheel balancing cause tyre wear and control issues. However, the wear pattern will be different. That is one of the most reliable ways of diagnosing and identifying exactly what is happening with your car. Let’s take a look.

  • Wheel Alignment – Misaligned wheels typically show two types of wear pattern. Excessive inner or outer sidewall wear is one of the more common indications. Whenever you notice this issue with your Car’s Tyres Wolverhampton or anywhere else in the country, take it to a service garage for immediate repair.

Also, feathering can occur if incorrect angles force the tyres from drag in one side. You will notice sharp edges on the tread, directed at one side to another.

Some other signs of misaligned wheels are –

  1. Your car is veering off to one side of the road.

  2. The steering wheel is pointing at an angle even when your car is going straight ahead.

  • Wheel Balancing – Wheel balancing causes localised tyre wear. You will notice bald spots on its carcass near the heavy spot. It can even wear out to an extent where the inner cables and ply would become visible. You will also notice some other issues while driving.

  1. You will feel unusual vibration the steering wheel and the car’s floorboard at certain speeds.

  2. Your car will also lose its directional stability due to the tyre repeatedly losing road grip with each revolution.

Ideally, you should take your car to a reliable garage, like Auto Surefit, whenever you notice unusual or excessive tyre wear. They have a team of expert technicians who are equipped with cutting-edge tools to correct both alignment and wheel balancing in Wolverhampton.

Both balancing and alignment issues should be taken care of as soon as you notice them. The reduction in control can create severe problems during your commute, as well as the excessive wear which can force you to change your car’s tyres faster than usual.

Leave a Reply

Your email address will not be published. Required fields are marked *