Why Does Your Vehicle Hydroplane?

Here are some tricks to taking back full control of a vehicle during rainy weather.

Also known as aquaplaning, hydroplaning is a very risky condition that happens when water trapped below your car causes your tyres to slip, lose contact, or skid around the road. No matter If it lasts an instant, several seconds, or minutes, hydroplaning is a sign that your tyres have lost traction and grip. During these moments, you need to keep calm and find the best way to deal with this issue. We know it can be scary, so here are some tips on how to deal with and avoid hydroplaning.

 

Your Car Tyres

All car Audi Tyres Northampton have grooves that work as tiny aqueducts which are in charge of pumping water and ice away from their contact patch, the area where your tyres meet the surface, at an incredible rate. Experts believe that the average tyre can easily disperse almost twenty liters of water. However, if your tyres cannot disperse water fast enough, their contact patch will begin to ride over the water, and not the street.

Have you driven across a huge puddle that you thought was less deep, just to feel your steering wheel slide between your hands? This sudden experience is called hydroplaning.

Many factors can influence your tyre’s capacity to withstand hydroplaning. One of the most important is tread depth. The deeper and larger those channels are, your tyres will be able to channel more water away from their contact patch. Most tyres have treads of more than 11/32 of one inch. But as your tyre wears, its tread will decrease, and the possibility of hydroplane will increase. If your tyre’s tread is less than 2/32 of one inch, you have to replace your tyres altogether as the risk of hydroplaning will be greater.

Luckily, it is pretty easy to identify bald tyres: first of all, they are worn away, their grooves have disappeared almost completely, and their wear bars are clearly vissible.

To be totally sure that your tyre tread is deep enough, you can take a coin and put it inside the grooves. If the groove does not cover Lincoln’s head, it means that your car tyres are below the statutory minimum depth, expanding the probability of hydroplaning. Keep in mind that tyres usually wear unevenly, that is why you need to check all its grooves separately. Also, rotating them frequently guarantees even wear.

When your tyres have sufficient tread depth, they will better resist hydroplaning compare to other tyres that are worn away.

Nevertheless, the construction of your tyre’s tread is not a precise visual sign of its capacity to resist hydroplaning. Several rubber compounds provide various amounts of grip, traction, and handling depending on the temperature. Even the exact same version of tyre will behave differently depending on its size and design.

How to Avoid Hydroplaning

If you want to minimize the chance of hydroplaning, there are few things that people can do in order to avoid hydroplaning: keep proper air pressure in all your Car Tyres Northampton and do not drive at high speeds, especially on wet streets. Poorly inflated tyres are more susceptible to hydroplaning and can reduce traction and grip in all type of situations.

Avoid driving fast if you surpass your tyres’ ability, your car will likely to be hydroplane. Just slow down and avoid driving on standing water.

The road surface can also cause hydroplaning. A well-paved street can remove water more easily. Preferably, you need to observe the road’s surface while driving and spot any holes where water could stand. Plus, using your cruise control when is raining is never recommended as you need to adjust the speed instantly. Furthermore, do not forget that driving right after a thunderstorm is extremely dangerous.

Leave a Reply

Your email address will not be published. Required fields are marked *